Agilent Technologies HP 8902A User Manual

The Agilent Technologies 8902A measuring receiverdelivers the accuracy and resolution of a high per-formance power meter at frequencies from 150 kHzto

10AGILENT 11722A SENSOR MODULESPECIFICATIONSFREQUENCY RANGE: 100 kHz to 2.6 GHz.POWER RANGE: +30 dBm (1 watt) to – 20 dBm (10 mW).INPUT SWR (connected

11AGILENT 11812A VERIFICATION KITSPECIFICATIONSFREQUENCY: 30 MHz.11812A ACCURACY: ±(0.003 dB + 0.003 dB/10 dB step).OPTION 050 WORST CASE CUMULATIVE T

Agilent Technologies’ Test and Measurement Support, Services, and AssistanceAgilent Technologies aims to maximize the value you receive,while minimizi

2AGILENT 8902A MEASURING RECEIVER*TECHNICAL SPECIFICATIONSSpecifications describe the test set’s warranted performanceand are valid over the entire op

3150 kHz ≤fc<10 MHzAmplitude ModulationRATES:20 Hz to 10 kHz, 150 kHz ≤fc<10 MHz.20 Hz to 100 kHz, 10 MHz ≤fc≤1300 MHz.DEPTH: to 99%.ACCURACY 2,

4Modulation ReferenceAM CALIBRATOR DEPTH AND ACCURACY:33.33% depth nominal, internally calibrated to an accuracy of ±0.1%.FM CALIBRATOR DEVIATION AND

5ZERO SET (digital settability of zero): ±0.07% of full scale on lowest range.Decrease by a factor of 10 for each higher range.Supplemental Characteri

613DETECTOR LINEARITY:For IF Synchronous Detector:±0.007 dB/dB change, but not more than±0.02 dB/10 dB change.Typically <±0.004 dB/dB change and<

Carrier Noise (Options 030-037)FREQUENCY RANGE: 10 MHz to 1300 MHz.CARRIER POWER RANGE: +30 dBm to –20 dBm; 12.5 kHz, 25 kHz and 30 kHz filters.+30 dB

8Audio DistortionFUNDAMENTAL FREQUENCIES: 400 Hz ±5% and 1 kHz ±5%.MAXIMUM EXTERNAL INPUT VOLTAGE: 3 V.DISPLAY RANGE: 0.01% to 100.0% (–80.00 dB to 0.

9OPTION 050 SPECIFICATIONSFREQUENCY RANGE: 2.5 MHz to 26.5 GHz.TUNED RF LEVEL DYNAMIC RANGE:–120 dBm to 0 dBm.–110 dBm to –15 dBm.POWER ACCURACY:Using