Agilent Technologies U3402A User Manual

Agilent U3400 Series 4½ and 5½ Digit Digital MultimetersBasic + Good = Elegant SimplicityData SheetFeaturesSimply right for your basic needs, without

10[1] To reduce noise interference that may be induced by the test leads, we recommend using a shielded test cable for measuring resistances above 500

11[1] Specified accuracy at input >5% of full scale. Frequency Frequency resolution, full-scale reading and accuracy [± (% of reading + count)] Di

12[1] Auto ranging is used when dBm operation is selected.[2] In VDC 1000 V range, 1200 V is readable. In VAC 750 V range, 1000 V is readable.[3] Read

13Full-scale display countsSupplemental measurement specifications Supplemental specifications Model Reading rate Display counts U3401A N/A 51

14Supplemental measurement specifications Measurement SpecificationAC+DC voltageMeasurement method AC+DC coupled true RMS: measures the AC compon

15Supplemental measurement specifications Measurement SpecificationResistance Input protection 500 VResponse time U3401A• Approximately 1.5 s

16Supplemental measurement specifications [1] Reference impedance is displayed on the secondary display.[2] Reading is displayed in watts (audio powe

 17Power supply• 100 V/120 V/220 V/240 V ± 10%• AC line frequency 50 Hz to 60 HzPower consumption16 VA maximumInput power optionManu

Each U3400 Series includes these standard shipped accessories:Accessories34138A Test Lead Kit 11059A Kelvin Probe Set U3400A-1CM Rack Mount KitU1161A

myAgilentmyAgilentwww.agilent.com/find/myagilentA personalized view into the information most relevant to you.www.axiestandard.orgAdvancedTCA® Extensi

Take a closer lookPrimary displaySecondary displayInput terminals and current fuseAC linevoltage selectorLine voltage fuseselection tableAC powerconne

3Typical dual display combinations and applications Primary display Secondary display Application Available inDCV ACV• Testing of DC-to-AC or AC-to-DC

[1] Input impedance is in parallel with capacitance <100 pF. [2] In VDC 1000 V range, 1200 V is readable with audio warning.[1] Input impedance is

5[1] Accuracy specified at input >5% of full scale.[2] Input voltage <200 V RMS.[3] For 5 kHz to 10 kHz, accuracy is 0.7% + 15.[4] In VAC 750 V r

6[1] Accuracy specified at input >5% of full scale.[2] Input voltage <200 V RMS.[3] In VAC 750 V range, 1000.0 V RMS is readable with audio warni

7[1] Typical at full-scale reading and voltage across the input terminals. [2] In 10 A range, >10 to 20 ADC is readable for 20 seconds maximum with

8[1] Accuracy specified at input >5% of full scale and >1 A for 10 A range unless otherwise stated.[2] Typical at full-scale reading and voltage

9[1] Accuracy specified at input >5% of full scale and >1 A for 10 A range unless otherwise stated.[2] Typical at full-scale reading and voltage