Agilent Technologies 34980A Service Manual download pdf (Page 23)

34980A Getting Started Guide 21

Exploring the 34980A Web Interface Over LAN

You can use the 34980A’s Web Browser Interface for remote access and control of the instrument via a

Java-enabled Web browser, such as Microsoft

Internet Explorer. Using the Web Interface, you can

configure, troubleshoot, and monitor your system remotely.

This section provides an overview of the 34980A Web Interface. The Web Interface works with the

34980A mainframe and all installed plug-in modules. For the examples provided in this section,

the 34921A multiplexer module is used for illustration purposes.

The following tasks assume you have configured the 34980A for LAN communication and

have verified connection to a LAN network. See pages 16 and 17 for more information.

Launching the Web Interface

1. Open your Internet browser from

your computer.

2. From the Tools>Internet

Options menu, navigate to

Connections (exact navigation

depends on your browser),

and then select LAN Settings.

3. From the LAN Settings dialog,

select/activate bypass proxy

server for local addresses

(exact terminology depends

on your browser).

4. Exit the Options window.

5. Enter the IP address of the

34980A in the Address field and

press return. Either refer to the

IP address you wrote on page 16

or 17, or use the 34980A’s front

panel Utility menu to read the

IP address.

6. After entering the appropriate

IP address, the 34980A Web

Interface’s Welcome Window

should appear.

Click here for Help

The procedures in this section will help you understand tasks commonly performed

using the 34980A’s Web Interface. For additional help on using the interface, click the

?Help with the Page tab on the lower-left corner of the Web Interface window.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

Agilent Technologies 34980A Service Manual Page 23