Agilent Technologies E6392B User's Guide download pdf (Page 31)

30 Chapter 2

Using Functions

Testing a Dual Band Mobile with AUTOMATIC TEST

Step 6. Set the highlighted fields of the test parameters as shown in the above screen. The

first three traffic channels in TCH are for GSM900 and the last three for DCS1800,

respectively.

If you want to supply dc power from the Test Set to the mobile, set the DC Power

field to Auto or On and enter your desired voltage value. To do this, use the

Universal DC Power Adapter and an appropriate dc power cable to connect

between the AUX connector of the Test Set and the mobile.

Step 7. Press Return, CONFIGURATION, Test Setup, then Test Sequence to obtain the

Test Setup: Test Sequence screen shown below.

Step 8. Enter BS in the second step of the test flow, then notice that the fifth step changes

to BS Release, the sixth to MS Call, and the seventh to MS Release.

Enter MS in the second step of the test flow again.

Step 9. Enter GSM900 and DCS1800 in Radio Standard and Multi Band, respectively, and

set other fields as shown in the illustration in Step 7.

Step 10. Enter Run in each field of the LOC. Update, Talk and BS Call steps.

Step 11. Enter Run in each cell of the test item table.

Step 11

Step 10

Step 8

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 205 206

No comments

Agilent Technologies E6392B User's Guide Page 31