Agilent Technologies E5071C Installation Guide download pdf (Page 19)

Chapter 2 13

Installation

Checking the Shipment

2. Installation

Checking the Shipment

After you receive the analyzer, carry out checks during unpacking according to the

following procedure.

WARNING When unpacking the analyzer, if the external face of the analyzer (such as the cover,

front/rear panel, LCD screen, power switch, and port connectors) appear to be

damaged during transport, do not turn on the power switch. Otherwise, you may get

an electric shock.

Step 1. Check that the packing box or shock-absorbing material used to package the analyzer has

not been damaged.

NOTE If the packing box or shock-absorbing material has been damaged, leave the packing box

and shock-absorbing material as is until other inspection items are checked as follows:

Step 2. Check the packaged items supplied with the analyzer for any damage or defects.

Step 3. By referring to the furnished contents list, check that all packaged items supplied with the

analyzer have been provided as per the specified options.

Step 4. After checking, if one of the following applies, contact your nearest Agilent Technologies

sales and service office.

1. The packing box or shock-absorbing material used to package the analyzer has been

damaged or the shock-absorbing material has traces where extreme force has been

applied.

2. A packaged item supplied with the analyzer has mechanical damage or defects.

3. A packaged item supplied with the analyzer is missing.

4. A fault has been detected in the subsequent operation check of the analyzer.

If an abnormality is detected in step 1, contact the company that transported the analyzer as

well as your nearest Agilent Technologies sales and service office. For inspection by the

transport company, save the packing box, shock-absorbing material, and packaged items as

you received them.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

No comments

Agilent Technologies E5071C Installation Guide Page 19