Agilent Technologies N8201A User's Guide download pdf (Page 101)

Preventive Maintenance 5

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 97

Half-Rack-Width Instrument

Bench Top Instrument

To remove a half-width instrument from a system rack

1 Power off the system. • For details see the system installation

guide.

2 Remove the selected instrument’s power cord

from the power strip in the rack.

3 The instrument is attached to the half-rack width

instrument beside it; remove that instrument’s

power cord from the power strip also.

• The instruments are secured together

by lock links at the front and rear. The

lock links at the rear attach with screws.

The lock links at the front hook together.

4 Remove the power cord and other cables from the

front and rear of both instruments.

• Note the location of cables for

re-installation.

5 Remove the four corner screws on the front of the

rack panel that secures the instruments in place.

• The screws are located near the corners

of the face of the instrument.

• Use a #2 Phillips screwdriver.

6 Slide both instruments, as a single unit, out from

the front of the rack and set them on a secure, flat

surface.

To remove an instrument from a bench top system

1 Power off each instrument in the system.

2 Unplug the selected instrument’s power

cord from the AC power supply.

3 Remove the power cord and other cables

from the front and rear of the instrument.

• Note the location of cables for re-installation.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 119 120

No comments

Agilent Technologies N8201A User's Guide Page 101