Agilent Technologies N8201A User's Guide download pdf (Page 33)

Hardware Setup and Configuration 2

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 29

(Optional) Connect to a LAN with a Cross-Over LAN Cable

If you wish to communicate directly between the N8201A performance downconverter and

your PC without the use of a LAN hub, you can connect directly to your PC.

1 Connect a cross-over LAN cable from the LAN connector on your PC to the LAN

connector on the rear panel of the N8201A performance downconverter.

2 Turn on power to the PC.

3 Turn on power to the N8201A performance downconverter and wait until the LAN LED

turns solid green or until you hear an attenuator click from within the

N8201A performance downconverter; this can take up to four minutes depending on

whether the instrument is using DHCP or Auto IP.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

No comments

Agilent Technologies N8201A User's Guide Page 33