Agilent Technologies X/P/K281C User Manual download pdf (Page 23)

N5250A Configuration Details

□ N5250A MM PNA system

, 10 MHz to 110 GHz, includes:

E8361A MW PNA with the following options:

• Configurable test set – Option 014

• Extended power range and bias-tees – Option UNL

• Frequency-offset mode – Option 080

• Reference channel switch – Option 081

• IF access – Option H11

N5260A millimeter-wave test set controller with test heads

• 67 to 110 GHz test heads

• 1.0 mm combiner assembly

• Interconnecting cables

• Installation and productivity assistance

Additional options available:

• Millimeter-wave modules with bias-tees -

N5250A Option 017

• Millimeter-wave modules with bias-tees and

port 2 attenuator - N5250A Option 018

• Receiver attenuator – Option 016

• Time-domain capability – Option 010

• Pulsed-RF measurement capability – Option H08

• Scalar-calibrated converter measurements – Option 082

• Frequency converter application – Option 083

Factory integration of the N5250A system integrates the E8361A

with Option H11 and the N5260A millimeter-wave controller with

test heads. On-site installation is included, and the entire system

carries a full one-year, on-site warranty (where available).

Option Descriptions

□ Millimeter-wave modules with bias-tees (N5250A Option 017)

Adds 67 GHz bias-tees to the combiner assembly between the

input to the combiner and the 67 GHz coupler. The bias-tees have

tri-axial connectors for force, sense, and ground. Positioning the

bias-tees close to the DUT greatly improves stability for on-wafer

and in-fixture devices. The bias-tees added for this option have a

voltage rating of 40 volts and a maximum of 0.5 amps.

□ Millimeter-wave modules with bias-tees and port 2

attenuator (N5250A Option 018)

Adds 67 GHz bias-tees to the combiner assembly between the

input to the combiner and the 67 GHz coupler. The bias-tees have

tri-axial connectors for force, sense, and ground. Positioning the

bias-tees close to the DUT greatly improves stability for on-wafer

and in-fixture devices. The bias-tees added for this option

have a voltage rating of 40 volts and a maximum of 0.5 amps

Additionally, Option 018 adds a 25 dB micrometer attenuator to

the port 2 test head.

Banded waveguide solution

In order to assemble a banded waveguide solution, the following

components are needed:

• Microwave PNA network analyzer (E8361A or E8362/3/4B)

with the following options:

• IF access - Option H11

• Configurable test set - Option 014

• Extended power range and bias-tees - Option UNL

• Frequency-offset mode - Option 080

• Reference channel switch - Option 081

• Millimeter-wave test set controller (N5260A)

with no options

• A set of waveguide modules:

• N5260AW15, 50 to 75 GHz

• N5260AW12, 60 to 90 GHz

• N5260AW10, 75 to 110 GHz

• N5260AW08, 90 to 140 GHz

• N5260AW06, 110 to 170 GHz

• N5260AW05, 140 to 220 GHz

• N5260AW03, 220 to 325 GHz

NOTE: To significantly improve system dynamic range above 220 GHz,

Agilent strongly recommends adding two external synthesizers

such as Agilent’s PSG Series signal generators; one for the RF

signal, and one for the LO signal.

For more detailed information, see PNA Millimeter-wave

Technical Overview, literature number 5988-9620EN.

On-wafer applications

For on-wafer applications, Cascade Microtech

provides complete

probing systems using the N5250A. These include both new

probing systems and upgrades to existing Cascade Microtech

products. Cascade can also provide on-wafer verification and

probing system training. Once the N5250A system is verified

in coax, Cascade Microtech will verify the system through its

wafer probes.

1. For more detailed information regarding the 110 GHz network analyzer system,

refer to the Agilent Web site: www.agilent.com/find/pna and download the

N5250A Technical Overview, literature number 5988-9620EN.

2. Up to 67 GHz.

3. Cascade Microtech is an Agilent Channel Partner.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Comments to this Manuals

No comments

Agilent Technologies X/P/K281C User Manual Page 23

Comments to this Manuals

Related products and manuals for Multimeters Agilent Technologies X/P/K281C