Agilent Technologies N8201A Service Manual download pdf (Page 13)

Security Features 1

Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20/40 GHz 13

Removing Persistent State Information Not Removed During Erase

Persistent State

The persistent state settings contain instrument setup information that can be toggled

within predefined limits such as display intensity, contrast, and the LAN address. In

vector models, the user IQ Cal is also saved in this area.

The following SCPI commands can be used to clear the IQ cal file and to set the

operating states that are not affected by a synthetic upconverter power-on, preset, or

*RST command to their factory default:

Instrument Setup

On the upconverter send this command to the upconverter:

:SYSTem:PRESet:PERSistent

LAN Setup

The LAN setup (hostname, IP address, subnet mask, and default gateway) information is

not defaulted with a upconverter power-on or *RST command. This information can

only be changed or cleared by entering new data.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

No comments

Agilent Technologies N8201A Service Manual Page 13