Agilent Technologies U2802A User Manual download pdf (Page 59)

U2741A

Product speciﬁcations

DC speciﬁcations

[1]

Function Range Input impedance

Test current/

Burden voltage,

Shunt resistance

Accuracy

±(% of reading +

% of range)

Temperature

coefﬁcient

0 °C to 18 ºC

28 °C to 55 °C

Voltage

[2]

100.000 mV 10 MΩ - 0.015 + 0.008 0.002 + 0.0008

1.00000 V 10 MΩ - 0.015 + 0.005 0.001 + 0.0005

10.0000 V 10 MΩ - 0.018 + 0.005 0.002 + 0.0005

100.000 V 10 MΩ - 0.018 + 0.005 0.002 + 0.0005

300.000 V 10 MΩ - 0.018 + 0.005 0.002 + 0.0005

Current

[3]

10.0000 mA - < 0.2 V, 10 Ω 0.06 + 0.015 0.005 + 0.0025

100.000 mA - < 0.2 V, 1 Ω 0.06 + 0.005 0.008 + 0.002

1.0000 A - < 0.3 V, 0.1 Ω 0.15 + 0.007 0.005 + 0.002

2.0000 A - < 0.8 V, 0.1 Ω 0.15 + 0.007 0.005 + 0.002

Resistance

[4]

100.000 Ω - 1.0 mA 0.03 + 0.008 0.006 + 0.0008

1.00000 kΩ - 1.0 mA 0.03 + 0.005 0.006 + 0.0005

10.0000 kΩ - 100 μA 0.03 + 0.005 0.006 + 0.0005

100.000 kΩ - 10.0 μA 0.03 + 0.005 0.006 + 0.0005

1.00000 MΩ - 1 μA 0.06 + 0.005 0.01 + 0.0005

10.0000 MΩ - 225 nA 0.25 + 0.005 0.025 +0.0005

100.000 MΩ - 225 nA || 10 MΩ 2.0 + 0.005 0.3 + 0.0005

Diode test

[5]

1.0000 V - 1.00 mA 0.015 + 0.03 0.005 + 0.0005

Continuity test

[6]

1.0000 kΩ - 1.00 mA 0.05 + 0.03 0.005 + 0.0005

NOTE To ensure better measurement results and to guard against the change of environment or setup, always

enable the Null offset.

[1]

Speciﬁcations are based on 30 minutes warm-up time, NPLC 20 resolution, and calibration temperature within 18 °C to 28 °C. For NPLC 0 and 0.025,

add 0.01% of range.

[2]

120% over range on all ranges except 300 VDC. Input protection up to 300 VDC.

[3]

Input protected with externally accessible 2 A, 250 V fast blown fuse.

[4]

Speciﬁcations are for 4-wire ohm or 2-wire ohms using null function in AMM software. If without null function in AMM software, add 0.2 Ω additional

error. Input protection up to 300 VDC. Speciﬁcations apply for NPLC ≥ 1.

[5]

Speciﬁcations are for the voltage measured at the input terminals only.

[6]

Continuity threshold is ﬁxed at less than 10 Ω.

1 ... 58 59 60 ... 74

Comments to this Manuals

No comments

Agilent Technologies U2802A User Manual Page 59

Comments to this Manuals

Related products and manuals for Measuring, testing & control Agilent Technologies U2802A