Agilent Technologies X/P/K281C User Manual download pdf (Page 25)

Network analyzer

test set

Network analyzer

test set

Test port

adapter

Device

under

test

Single cable

Device

under

test

Cable set

Measurement Accessories

A complete list of RF and microwave test accessories

is available on our Web site:

www.agilent.com/find/accessories

Accessories are available in these connector types:

50 ohm Type-N, 3.5 mm, 7 mm, 2.4 mm, 2.92 mm, 1.85 mm, 1.0 mm,

and waveguide. Test port cables and a calibration kit should be

added for a complete measurement system. A verification kit is

used to verify corrected system performance.

Cables and adapter sets

Agilent offers cables in the following types:

• single cables in semi-rigid and flexible

• cable sets in semi-rigid and flexible

There are also adapter sets available that protect the test port

and convert the port to the desired connector interface. These

kits contain:

• one male adapter

• one female adapter

To attain the best mechanical rigidity for device connection, use

a single cable and the appropriate special adapter set. To attain

the greatest flexibility for device connection, use a cable set.

Calibration kits

Coaxial measurements

Mechanical calibration kits include standards, such

as opens, shorts and loads, which are measured by the network

analyzer for increased measurement accuracy.

Electronic calibration (ECal) kits replace mechanical calibration

standards with one solid-state calibration module that is controlled

by the network analyzer via USB, to present many different

impedances to the test ports. A full two-port calibration can be

performed quickly with a single connection. This technique

reduces operator errors and connector wear and abrasion.

Choose a calibration kit for each connector type to be used.

Economy, includes:

• open standards (male and female)

• short standards (male and female)

• fixed-termination standards (male and female)

Standard, includes the devices in the economy kit and adds:

• sliding load standards (male and female) or a series of

offset shorts

Precision, includes the devices in the economy kit and adds:

• 50 ohm airline(s) for TRL calibration

• TRL adapters

Waveguide measurements

For waveguide measurements, Agilent offers mechanical calibration

kits that include:

• waveguide-to-coax adapters (X, P, K, R, Q, U, V)

• precision waveguide section

• flush short circuit

• fixed terminations

• straight section

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

Comments to this Manuals

No comments

Agilent Technologies X/P/K281C User Manual Page 25

Comments to this Manuals

Related products and manuals for Multimeters Agilent Technologies X/P/K281C