Agilent Technologies X/P/K281C User Manual download pdf (Page 34)

□ Z5623AH84 Pulsed S-parameter test set, 2 to 40 GHz

Includes two pin switches for bi-directional (forward and

reverse) pulsed-RF stimulus, and two directional couplers for

the reference channels. It does not include internal amplifiers,

but has front panel access loops for switching in external

amplifiers to boost port power in both directions.

□ Z5623AH86 Pulsed S-parameter test set, 2 to 40 GHz

Includes one pin switch to modulate the analyzer’s

internal source in the forward direction, and one directional

coupler for the reference channel. It does not include internal

amplifiers, but has front panel access loops for switching in

an external amplifier to boost port power.

□ Z5623AH87 Pulsed S-parameter test set, 1 to 50 GHz

Includes two pin switches for bi-directional (forward and

reverse) pulsed-RF stimulus. It does not include internal amplifiers,

but has front panel access loops for switching in external

amplifiers to boost port power in both directions.

□ Z5623AH89 Pulsed S-parameter test set, 10 MHz to 5 GHz

Includes one pin switch to modulate the analyzer’s

internal source in the forward direction. This test set has no

internal amplifier, no reference channel variable attenuator, and

no GPIB control (manual control only).

□ Z5623AH90 Pulsed S-parameter test set, 1 to 50 GHz

Same as Z5623AH87, but adds 50 GHz couplers to the front

panel to allow DUT connection on the test set instead of

using the PNA test ports.

Note: Pulse biasing can be achieved with or without the use

of a pulsed S-parameter test set. A proper pulse-bias driver

must be used. Contact your local Agilent Sales Representative

for additional pulsed S-parameter test set configurations and

details.

Peripherals

The following peripherals may be used with the Microwave PNA

Series. Other peripherals not listed here may also be compatible

with these instruments.

Monitors

VGA-compatible monitor

Printers

USB, LAN, parallel or serial printers with Microsoft® Windows®

printer driver

Interface cables

Choose the appropriate cables to connect each

peripheral to the network analyzer.

□ 10833A GPIB cable, 1.0 m (3.3 ft)

□ 10833B GPIB cable, 2.0 m (6.6 ft)

□ 10833D GPIB cable, 0.5 m (1.6 ft)

□ 82357B GPIB to USB interface

Applications

Material measurements

□ 85070E High-Temperature Dielectric Probe Kit

The 85070E enables measurements of the dielectric properties

of materials quickly and conveniently. Measurements made

with this probe are nondestructive and require no sample

preparation. The dielectric probe is well suited for measurements

of liquid, semisolid and flat solid materials. Measurement

results can be viewed in a variety of formats (ε’

, ε”

, tan δ

or Cole-Cole). The supplied software can be run in the PNA

analyzer or on a PC.

□ 85071E Materials Measurement Software

The 85071E materials measurement software calculates the

permittivity and permeability of material samples placed in a

coaxial airline or a rectangular waveguide. The measurement

technique works well for solid materials that can be machined

to fit precisely inside a transmission line. Measurement

results can be viewed in a variety of formats (ε’

, ε

, µ’

, µ”

, tan δ,

or Cole-Cole µ). The software can be run in the PNA analyzer

or on a PC.

Pulsed measurements

The pulsed RF measurement capability (Option H08) and IF access

(Option H11), are recommended for pulsed measurements with

the PNA Series.

Pulse/pattern generators

Recommended to provide pulse signals and timing to the pulsed

S-parameter text set and MW PNA

□ 81104A Pulse/pattern generator, 80 MHz, single-/dual-channel

with one or two Agilent 81105A output modules.

□ 81110A Pulse/pattern generator, 165 MHz, single-/dual-channel

with one or two Agilent 81111A output modules.

Note: Each pulse/pattern generator must be ordered with its

associated output modules depending on the measurement

configuration.

Pulsed S-Parameter test sets

□ Z5623AH81 Pulsed S-parameter test set, 2 to 20 GHz

Includes a pin-diode switch to modulate the analyzer’s

internal source, an amplifier, and directional coupler

to provide a pulsed reference to the analyzer.

□ Z5623AH83 Pulsed S-parameter test set, 2 to 20 GHz

Includes two pin switches for bi-directional (forward and

reverse) pulsed-RF stimulus, and two directional couplers for

the reference channels. It does not include internal amplifiers,

but has front panel access loops for switching in external

amplifiers to boost port power in both directions.

1. For more details regarding pulsed measurement configurations with the

PNA Series, refer to Agilent’s Web site (www.agilent.com/find/pna)

to download a copy of the Microwave PNA Series Network Analyzer

Configuration Guide for Pulsed Measurements, literature number 5988-9833EN.

1 2 ... 29 30 31 32 33 34 35 36 37 38

Comments to this Manuals

No comments

Agilent Technologies X/P/K281C User Manual Page 34

Comments to this Manuals

Related products and manuals for Multimeters Agilent Technologies X/P/K281C