Agilent Technologies 16048A Specifications download pdf (Page 18)

16034G Test Fixture

Terminal Connector: 4-Terminal Pair, BNC

DUT Connection: 2-Terminal

Dimensions (approx.):

120(W) x 50(H) x 70(D) [mm]

Weight (approx.): 200 g

Additional Error:

f: [MHz]

Open compensation Short compensation

DimensionsDUT measurement

Description: This test fixture is designed for impedance

evaluations of SMD. The minimum SMD size that this fixture

is adapted to evaluate is 0.6(L) x 0.3(W) [mm].

Applicable Instruments: 4263B, 4268A, 4279A*, 4284A*,

4285A, 4288A, 4294A,

E4980A, E4981A

* denotes the instrument is obsolete.

Frequency: DC to 110 MHz

Maximum Voltage: ±40 V peak max (AC+DC)

Operating Temperature: 0°C to 55°C

DUT Size: See figure below

Furnished Accessories:

Compensation and Measurement: Open and short

compensations are recommended before measurement. When

measuring above 3 MHz, load compensation is also

recommended. Open compensation is performed by separating

the high and the low electrodes from each other. The

separation size should be equivalent to the DUT’s width.

Short compensation is performed placing the high and low

electrodes in contact together. Load compensation is

performed by using the furnished 100 Ω SMD chip resistor.

After performing open, short and load compensations, the

DUT is inserted into the test fixture. The following figures

show how compensation and measurement are performed.

Type of Error Impedance

Proportional Error 0.5 x (f/10)

[%]

Open Repeatability 5 + 500 x (f/10) [nS]

Short Repeatability 10 + 13 x (f/10) [mΩ]

4284A with 16034G

Description P/N Qty.

Case for 100 Ω SMD Resistance 1540-0692 1

100Ω Chip Resistor 0699-2488 10

Operation Manual 16034-90011 1

Up to 110 MHz (4-Terminal Pair) SMD

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Comments to this Manuals

No comments

Agilent Technologies 16048A Specifications Page 18

Comments to this Manuals

Related products and manuals for Cable network testers Agilent Technologies 16048A