Agilent Technologies 16048A Specifications download pdf (Page 22)

16334A Tweezers Contact

Test Fixture

Terminal Connector: 4-Terminal Pair, BNC

DUT Connection: 2-Terminal

Cable Length (approx.): 1m (from BNC connectors

to the top of tweezers)

Weight (approx.): 290 g

Additional Error:

f: [MHz]

Up to 110 MHz (4-Terminal Pair) SMD

Type of Error Impedance

Proportional Error ±2 x (f/10)

Description: This test fixture is designed for impedance

evaluations of SMD. The minimum SMD size that this fix-

ture is adapted to evaluate is 1.6(L) x 0.8(W) [mm]. The

tweezers’ contacts on this fixture makes it easy to hold

the DUT.

Applicable Instruments: 4263B, 4268A, 4279A*, 4284A*,

4288A, E4980A, E4981A, (4285A, 4294A)**

* denotes the instrument is obsolete.

** applicable in a limited frequency range.

Frequency: 5 Hz to 15 MHz

Maximum Voltage: ±42 V peak max (AC+DC)

Operating Temperature: 0°C to 55°C

DUT Size:

10 mm (width)

See figure below

Furnished Accessories:

Compensation and Measurement: Open and short

compensations are recommended before measurement.

Open and short compensations are performed by using

the furnished compensation block. After performing open

and short compensations, the DUT is sandwiched by the

tweezers’ contacts and is measured.

Description P/N Qty.

Compensation Block 16334-60001 1

Operation Note 16334-90000 1

DUT Dimensions

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 103 104

No comments

Agilent Technologies 16048A Specifications Page 22