Agilent Technologies 16048A Specifications download pdf (Page 19)

16034H Test Fixture

Terminal Connector: 4-Terminal Pair, BNC

DUT Connection: 2-Terminal

Dimensions (approx.):

120(W) x 50(H) x 70(D) [mm]

Weight (approx.): 200 g

Additional Error:

f: [MHz]

Up to 110 MHz (4-Terminal Pair) SMD

Type of Error Impedance

Proportional Error 0.5 x (f/10)

[%]

Open Repeatability 5 + 500 x (f/10) [nS]

Short Repeatability 10 + 13 x (f/10) [mΩ]

Description: This test fixture is designed for impedance

evaluations of array-type SMD. The minimum SMD size

that this fixture is adapted to evaluate is 1.6(L) x 0.8(W)

[mm]. Since the tip of the measurement electrodes are

very thin and the device holder is extremely flat, the

device can be shifted and the measurement electrodes can

contact the each elements of the array-type component.

Applicable Instruments: 4263B, 4268A, 4279A*, 4284A*,

4285A, 4288A, 4294A, E4980A, E4981A

* denotes the instrument is obsolete.

Frequency: DC to 110 MHz

Maximum Voltage: ±40 V peak max (AC+DC)

Operating Temperature: 0°C to 55°C

DUT Size: See figure below

Furnished Accessories:

Compensation and Measurement: Open and short

compensations are recommended before measurement.

When measuring above 3 MHz, load compensation is also

recommended. Open compensation is performed by

separating the high and the low electrodes from each

other. The separation should be equivalent in size to the

DUT’s width. Short compensation is performed by

placing the high and low electrodes in contact together.

Load compensation is performed by using the furnished

100 Ω SMD chip resistor. After performing open, short

and load compensations, the DUT is inserted into the test

fixture. Refer to the 16034G figures to see how

compensation and measurement are performed.

Description P/N Qty.

Case for 100 Ω SMD Resistance 1540-0692 1

100Ω Chip Resistor 0699-2488 10

Operation Manual 16034-90012 1

DUT Dimensions

Electrode dimensions

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 103 104

Comments to this Manuals

No comments

Agilent Technologies 16048A Specifications Page 19

Comments to this Manuals

Related products and manuals for Cable network testers Agilent Technologies 16048A