Agilent Technologies 16048A Specifications download pdf (Page 66)

16094-65000 Probe Test Fixture

Terminal Connector: 7 mm

DUT Connection: 2-Terminal

Electrical Length: 23.2 mm

Weight (approx.): 25 g

Additional Error: See figure below

Up to 3 GHz (7 mm) Probe

Description: This probe test fixture is used along with the

7 mm cable (P/N 8120-4779). Together they provide the

capability to perform in-circuit measurements (printed cir-

cuit patterns, the input/output impedance of circuits, etc.).

Applicable Instrument: 4294A + 42942A, (4287A, 4395A

with Opt. 4395A-010 + 43961A, 4396B with Opt. 4396B-010

+ 43961A, E4991A)**

When used with 16085B: 4263B, 4268A, 4279A*, 4284A*,

4285A, 4288A, E4980A, E4981A

* denotes the instrument is obsolete.

** applicable in a limited frequency range.

Frequency: DC to 125 MHz

Maximum DC Bias Voltage: ±40 V

Operating Temperature: 0°C to 55°C

DUT size: See figure below.

Compensation and Measurement: The compensation

with following 3 steps is recommended.

1. Perform open/short/load calibration at the end of 7 mm

coaxial extension cable before connecting the

16094-65000 to the cable.

2. After connecting the 16094-65000 to the tip of the

coaxial cable, enter the electrical length value of the

16094-65000, 23.2 mm, to the instrument.

3. Perform open and short compensations at the tip of the

16094-65000. The open compensation is performed by

separating the high and the low electrodes from each

other. Short compensation is performed by shorting the

probe. To short the probe, it is recommended to use a

shorting device with gold-plated surfacing (which

provides stable contact resistance). The figures in this

page shows the images of open and short conditions.

Necessary Accessories:

The operating note of this product is not furnished as stan-

dard. It is downloadable from Agilent website (www.agi-

lent.com). Search the web using the keyword “16094A”.

Open compensation

Short compensation

L: 1 mm ~ 15 mm

spacing

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 103 104

Comments to this Manuals

No comments

Agilent Technologies 16048A Specifications Page 66

Comments to this Manuals

Related products and manuals for Cable network testers Agilent Technologies 16048A