Agilent Technologies 16048A Specifications download pdf (Page 20)

16044A Test Fixture

Terminal Connector: 4-Terminal Pair, BNC

DUT Connection: 4-Terminal

Dimensions (approx.):

160(W) x 70(H) x 98(D) [mm]

Weight (approx.): 550 g

Additional Error:

f: [MHz]

Up to 110 MHz (4-Terminal Pair) SMD

Description: This test fixture is designed for impedance

evaluations of low impedance SMD. The minimum SMD

size that this fixture is adapted to evaluate is 1.6(L) x

0.8(W) [mm]. The 16044A has a Kelvin (4-Terminal)

contact, which ensures repeatable measurements. It is

also equipped with a mechanism for easily performing

open and short compensation.

Applicable Instruments: 4263B, 4268A, 4279A*,

4284A*, 4288A, 4338B, E4980A, E4981A, (4285A, 4294A)**

* denotes the instrument is obsolete.

** applicable in a limited frequency range.

Frequency: DC to 10 MHz

Maximum Voltage: ±40 V peak max (AC+DC)

Operating Temperature: 0 °C to 55 °C

DUT Size: See figure below

Furnished Accessories:

To maintain the measurement precision, it is

recommended that contact pins be replaced approximately

every 50,000 times (supplementary value).

Type of Error Impedance

Proportional Error 2 x (f/10)

[%]

Open Repeatability

1.5 + 200 x (f/10) [nS]

Short Repeatability

1.5 + 40 x (f/10) [mΩ]

Description P/N Qty.

Cleaning Rod 5182-7586 1

Operation and Service Manual 16044-90020 1

Test fixture overview

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

No comments

Agilent Technologies 16048A Specifications Page 20