Agilent Technologies 16048A Specifications download pdf (Page 23)

16043-60011/12

3-Terminal SMD Test Fixture

Terminal Connector: 4-Terminal Pair, BNC

DUT Connection:

3-Terminal (including the guard terminal)

Dimensions (approx.):

75 (W) x 105 (H) x 95 (D) [mm]

Weight (approx.): 500 g (16043-60011)

330 g (16043-60012)

Additional Error:

Guard Terminal Residual L: ≤6 nH

Guard Terminal Residual R: ≤20 mΩ

The additional error shown above is the

characteristics of when the DUT connection

is 2-Terminal. Ideally, in a 3-Terminal DUT

connection, the guard effect should be taken

into account in the measurement accuracy.

To acknowledge the guard terminal’s effect,

a characteristics equation is provided in the

operation manual.

Up to 110 MHz (4-Terminal Pair) SMD

Type of Error Impedance

Proportional Error 0.4 + 7.2 x (f/100)

[%]

Open Repeatability 10 + 600 x (f/10) [nS]

Short Repeatability 30 + 6 x (f/10) [mΩ]

Description: The 16043-60011 or 16043-60012 enable

3-Terminal resonator SMD to be measured by using the

guarding technique. Having a 4-Terminal Pair configura-

tion it ensures high precision and repeatability. These fix-

tures accommodate a wide range of SMD sizes by provid-

ing 3 different contact boards. The 16043-60011 is

equipped with a sliding mechanism to enable the mea-

surement of load capacitors in the 3-Terminal resonator.

The 16043-60012 is not equipped with the sliding mecha-

nism. 2-Terminal SMD with bottom electrodes can be

measured as well. As shown in the figure below, by

connecting the device’s G-terminal to instrument’s guard

terminal, only Z1 of the resonator will be measured.

16043-60011/12 3-Terminal SMD Test Fixtures

In order to measure Z2 and Z3, the sliding function of

16043-60011 can be utilized.

Applicable Instruments: 4263B, 4268A, 4279A*,

4284A*, 4285A, 4288A, 4294A, E4980A, E4981A

* denotes the instrument is obsolete.

Frequency: DC to 110 MHz

Maximum Voltage: ±42 V peak max (AC + DC)

Operating Temperature: 0°C to 70˚C

DUT Size: The applicable DUT dimensions are shown

below. A contact board is required for measurement and

its dimensions and ordering info are shown on the next

page.

Guarding technique of an impedance measurement instrument

Electrode configuration of DUT and applicable DUT dimensions

Description P/N Qty.

With sliding function 16043-60011 1

Without sliding function 16043-60012 1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 103 104

Comments to this Manuals

No comments

Agilent Technologies 16048A Specifications Page 23

Comments to this Manuals

Related products and manuals for Cable network testers Agilent Technologies 16048A