Agilent Technologies 16048A Specifications download pdf (Page 34)

Up to 110 MHz (4-Terminal Pair) DC Bias Accessories

16065A 200Vdc External Voltage

Bias Fixture

Terminal Connector: 4-Terminal Pair, BNC

DUT Connection: 4-Terminal

External Bias Input connector: High Voltage BNC(f)

Dimensions (approx.): 180(W) x 120(H) x 200(D) [mm]

Cable Length (approx.): 40 cm

Weight (approx.): 1500 g

High Voltage BNC(f) connector for external bias input

BNC(f) connector for voltage monitor output

LCR meter with 16065A

16065C 40Vdc External

Voltage Bias Adapter

Terminal Connector: 4-Terminal Pair, BNC

External Bias Input connector: BNC(f)

Dimensions (approx.): 160(W) x 50(H) x 150(D) [mm]

Cable Length (approx.): 210 mm

Weight (approx.): 450 g

LCR meter with 16065C

Description: This test fixture makes it possible to mea-

sure a DUT with up to ±200 V DC bias. The same mod-

ules of 16047A/D can be used to allow measurements of

axial/radial lead components.

Applicable Instruments: 4263B, 4268A, 4279A*,

4288A, E4981A (4284A*, 4285A, 4294A, E4980A)**

* denotes the instrument is obsolete.

** applicable in a limited frequency range.

Frequency: 50 Hz to 2 MHz

Maximum DC Bias: ±200 V

Blocking Capacitor of 5.6 µF is connected in with the Hc

terminal.

Operating Temperature: 0°C to 55°C

DUT Size: See the 16047A figure with module sizes.

Furnished Accessories:

Compensation and Measurement: Open, short and

load compensations are recommended before measure-

ment. Short compensation is performed by shorting the

contacts of the test fixture with a shorting plate as

described for the 16047A. Load compensation is performed

by inserting a known standard device. After performing

open, short and load compensations, the DUT is connected

to the test fixture.

Description P/N Qty.

Module For Axial Lead 16061-70022 1

Module For Radial Lead mounting

16061-70021 1

on fixture

Module For Short Radial Lead 16047-65001 1

Shorting Bar 5000-4226 1

Operation and Service Manual 16065-90011 1

Description: This adapter is designed to operate specifi-

cally with the 4263B, 4268A, 4288A and the E4981A. By

connecting an external DC voltage source to this adapter,

a bias voltage of up to ±40 V can be supplied to a DUT.

The DUT can be inserted by connecting any direct attach-

ment 4-Terminal Pair test fixture to the adapter.

Applicable Instruments: 4263B, 4268A, 4288A, E4981A

Frequency: 100 Hz to 1 MHz

Maximum DC Bias: ±40 V

Blocking Capacitor of 100 µF is connected in series with

the Hc terminal.

Operating Temperature: 0 °C to 55 °C

Applicable Fixtures: 16034E/G/H, 16044A,

16047A/D/E,

16048A/B*/D/E, 16089A/B/C/D/E

* denotes the instrument is obsolete.

Furnished Accessories:

Compensation and Measurement: Open and short com-

pensations are recommended before measurement. Short

compensation is performed by shorting the contacts of the

test fixture that is in use. After performing open and short

compensations, the DUT is connected to the test fixture.

Description P/N Qty.

Operation and Service Manual 16065-90020 1

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 103 104

Comments to this Manuals

No comments

Agilent Technologies 16048A Specifications Page 34

Comments to this Manuals

Related products and manuals for Cable network testers Agilent Technologies 16048A