Agilent Technologies 16048A Specifications download pdf (Page 21)

Up to 110 MHz (4-Terminal Pair) SMD

Electrode dimensions

Short compensationOpen compensation Inserting a DUT

Compensation and Measurement: Open and short

compensations are recommended before measurement.

Short compensation is performed by bringing down the

shorting plate (which is already on the fixture) to short all

4 terminals. Open compensation is performed by bringing

down both the open plate and the shorting plate to

separate the high terminals from the low terminals. After

performing open and short compensations, the DUT is

inserted into the test fixture. The figures below show how

compensation and measurement are performed.

Diameter of probe pin is 0.19 mm

Diameter of Blade electrode’s contact spot is 0.5 mm

Spacing between Blade electrode and probe pin is 0.11 mm

SMD can be between 1.6 and 8.0 mm in width

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 103 104

No comments

Agilent Technologies 16048A Specifications Page 21