436 Chapter 13
SCPI Command Reference
E5061A/E5062A commands
:SOUR{1-4}:POW:SLOP
Syntax :SOURce{[1]|2|3|4}:POWer[:LEVel]:SLOPe[:DATA] <numeric>
:SOURce{[1]|2|3|4}:POWer[:LEVel]:SLOPe[:DATA]?
Description Sets the correction value of the power slope feature of channel 1 (:SOUR1) to channel 4
(:SOUR4).
Parameters
If the specified parameter is out of the allowable setup range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Example of use
10 OUTPUT 717;":SOUR1:POW:SLOP 0.1"
20 OUTPUT 717;":SOUR1:POW:SLOP?"
30 ENTER 717;A
Related commands :SOUR{1-4}:POW:SLOP:STAT on page 437
Equivalent key
[Sweep Setup] - Power - Slop [xxx dB/GHz]
<numeric>
Description The correction value of the power slope feature
Range -2 to 2
Preset value 0
Unit dB/GHz
Resolution 0.01
urenrjrjkvnm