Agilent Technologies 4294A Instruction Manual download pdf (Page 11)

Safety Summary

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or with specific WARNINGS elsewhere in this manual may impair the

protection provided by the equipment. Such noncompliance would also violate

safety standards of design, manufacture, and intended use of the instrument.

The Agilent Technologies assumes no liability for the customer’s failure to comply

with these requirements.

NOTE The Agilent 4294A complies with INSTALLATION CATEGORY II and

POLLUTION DEGREE 2 in IEC61010-1. The Agilent 4294A is an INDOOR

USE product.

NOTE LEDs in the Agilent 4294A are Class 1 in accordance with IEC60825-1,

CLASS 1 LED PRODUCT.

• Ground the Instrument

To avoid electric shock, the instrument chassis and cabinet must be grounded

with the supplied power cable’s grounding prong.

• DO NOT Operate in an Explosive Atmosphere

Do not operate the instrument in the presence of inflammable gasses or fumes.

Operation of any electrical instrument in such an environment clearly

constitutes a safety hazard.

• Keep Away from Live Circuits

Operators must not remove instrument covers. Component replacement and

internal adjustments must be made by qualified maintenance personnel. Do not

replace components with the power cable connected. Under certain conditions,

dangerous voltage levels may exist even with the power cable removed. To

avoid injuries, always disconnect the power and discharge circuits before

touching them.

• DO NOT Service or Adjust Alone

Do not attempt internal service or adjustment unless another person, capable of

rendering first aid and resuscitation, is present.

• DO NOT Substitute Parts or Modify the Instrument

To avoid the danger of introducing additional hazards, do not install substitute

parts or perform unauthorized modifications to the instrument. Return the

instrument to an Agilent Technologies Sales and Service Office for service and

repair to ensure that safety features are maintained in operational condition.

• Dangerous Procedure Warnings

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 468 469

No comments

Agilent Technologies 4294A Instruction Manual Page 11