Agilent Technologies 4294A Instruction Manual download pdf (Page 400)

392 Appendix B

Key Definitions

Softkeys displayed by pressing the [Marker] key

Table B-58 Marker (Marker) menu

Key operation: [Marker]

Softkey Function GPIB command

MKR ON off Toggles on and off all the markers displayed on the screen. The markers include

main marker (marker number: 0), sub markers (marker number: 1 - 7), and delta

marker (D). Even if you turn off the markers using this key, their states at the on

status are stored. Therefore, when you turn them on again, their states at the

previous on status are restored.

MKR {ON|OFF}

SUB MKR ä Displays Table B-59, “Sub marker configuration (Set SMKR) menu,” on page

392.

(N/A)

CLEAR SUB MKR ä Displays Table B-60, “Sub marker deletion (Clear SMKR) menu,” on page 393. (N/A)

MKR ON [ ] For the selected active trace (A or B), selects between placing the marker on the

data trace and displaying its value [DATA] or placing the marker on the memory

trace and displaying its value [MEMORY].

MKRO {DATA|MEMO}

MKR COUPLE ON off Toggles on and off the marker couple function. If the marker couple function is

on, the movement of the marker on the inactive trace becomes interlocked with

the movement of the marker on the selected active trace (A or B). If the marker

couple function is off, the marker on the inactive trace moves independently of

the marker on the selected active trace (A or B). This configuration is commonly

applied to traces A and B.

MKRCOUP {ON|OFF}

MKR [ ] For the selected active trace (A or B), toggles the marker movement mode

between the interpolation mode [CONT] and the non-interpolation mode

[DISCRETE]. In the non-interpolation mode, the markers can read out the values

of only actual measurement points on the trace. On the other hand, in the

interpolation mode, interpolation calculation between measurement points is

performed so that markers can read out values of any position on the trace.

MKRMOV

{CONT|DISC}

DMODE MENU ä Displays Table B-61, “Delta marker (Delta MKR) menu,” on page 393. (N/A)

Table B-59 Sub marker configuration (Set SMKR) menu

Key operation: [Marker] - SUB MKR

Softkey Function GPIB command

1: OFF Pressing this key in the off status (1: OFF) causes sub marker 1 to appear at the

current position of the main marker (marker number: 0). After that, each time

this key is pressed, sub marker 1 moves to the position of the main marker at that

time. If in the on instead of OFF status of the softkey label, the measurement

parameter value and the sweep parameter value at the position of sub marker 1

are displayed. This function enables you to read out the values of the sub marker

easily without using the marker list function in Table B-71, “Utility (Utility)

menu,” on page 402.

SMKR1 ON

2: OFF For sub marker 2, executes the same operation as the above key for sub marker 1. SMKR2 ON

3: OFF For sub marker 3, executes the same operation as the above key for sub marker 1. SMKR3 ON

4: OFF For sub marker 4, executes the same operation as the above key for sub marker 1. SMKR4 ON

5: OFF For sub marker 5, executes the same operation as the above key for sub marker 1. SMKR5 ON

1 2 ... 395 396 397 398 399 400 401 402 403 404 405 ... 468 469

Comments to this Manuals

No comments

Agilent Technologies 4294A Instruction Manual Page 400

Comments to this Manuals

Related products and manuals for Multimeters Agilent Technologies 4294A