Agilent Technologies 4294A Instruction Manual download pdf (Page 130)

122 Chapter 5

Setting Measurement Conditions

Sweeping Multiple Sweep Ranges with Different Conditions in a Single

Action (List Sweep)

unit key ([G/n], [M/m], [k/m], or [´1]).

• Turn the rotary knob (

m) until the desired value is set.

• Press the step keys ([][¯]) to set the desired value.

The setting above will add a new value for the dc current bias level to the cell located in the

segment row and the dc bias column (BIAS) of the list sweep table in editing mode.

Step 21. Press the

more 2/3 key to display the segment edit menu (3/3).

Step 22. Press the

BANDWIDTH [ ] key to display the measurement bandwidth setting menu.

Step 23. Select the measurement bandwidth for the segment.

The setting above will add a new value for the measurement bandwidth to the cell located

in the segment row and the measurement bandwidth column (BW) of the list sweep table in

editing mode.

Step 24. Press the

return key to return to the segment edit menu (3/3).

Step 25. Press the POINT AVG FACTOR key. This will display the current setting for the segment’s

point averaging in the parameter settings located in the upper left area of the screen.

Step 26. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify a

value for the point averaging.

• Enter the desired value with the numeric keys (

[0] to [9], and [.]) and then press the

[´1] key.

• Turn the rotary knob (

m) until the desired value is set.

• Press the step keys ([][¯]) to set the desired value.

The setting above will add a new value for the point averaging in the cell located in the

segment row and the point averaging column (AVG) of the list sweep table in editing

mode.

Step 27. When editing of the segment is finished, press the

done key to save the edited segment.

Pressing this key also returns you to the list sweep menu.

NOTE If you want to abort editing of the segment and restore the original state before entering the

edit mode, press the

cancel key.

Step 28. With the segment number for the edited segment selected (">" is displayed to the left of the

segment number of the SEG line in the list sweep table), press the PEN key. The number of

the pen selected to draw the trace of the segment is displayed in the Setting Parameter

Measurement bandwidth Key stroke

1 (measurement speed maximized)

1FAST

2 2

3 3

4 4

5 (measurement accuracy maximized) 5 PRECISE

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 468 469

Comments to this Manuals

No comments

Agilent Technologies 4294A Instruction Manual Page 130

Comments to this Manuals

Related products and manuals for Multimeters Agilent Technologies 4294A