System Commands 7
Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz 193
Deletes header file information for the waveform file "<file_name>". This command does
not require a personality modulation to be on. The header file contains N8211A/N8212A
settings and marker routings associated with the waveform file. Refer to “File Name
Variables" on page 164 for information on the file name syntax.
Example
:MMEM:HEAD "/USER/WAVEFORM/Test_Data"
The example deletes header file information for the Test_Data waveform file.
*RST N/A
:HEADer:DESCription
Supported All
:MMEMory:HEADer:DESCription "<file_name>","<description>"
:MMEMory:HEADer:DESCription? "<file_name>"
Inserts a description for the header file named. The header description is limited to 32
characters.
Refer to “File Name Variables" on page 164 for information on the file name syntax.
Example
:MMEM:HEAD:DESC "/USER/LIST/Test_Data","This is new header data"
The example inserts a description into the Test_Data header file. In this example, the file is
located in the N8211A/N8212A’s non–volatile list memory.
*RST N/A
:LOAD:LIST
Supported All
:MMEMory:LOAD:LIST "<file_name>"
Loads list data from the List file "<file_name>".
Refer to “File Name Variables" on page 164 for information on the file name syntax.
Example
:MMEM:LOAD:LIST "Sweep_Data"
The example loads sweep configuration data from the Sweep_Data List file.
Comments to this Manuals