Using the LAN Interface 2
Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz 29
If you wish to communicate directly between the N8211A/N8212A and your PC without the
use of a LAN hub, you can connect directly to your PC.
1 Connect a cross-over LAN cable from the LAN connector on your PC to the LAN
connector on the rear panel of the N8211A/N8212A.
2 Turn on power to the PC.
3 Turn on power to the N8211A/N8212A and wait until the LAN LED turns solid green;
this can take up to four minutes depending on whether the instrument is using DHCP or
Auto IP.
Comments to this Manuals