Agilent Technologies N8201A Service Manual download pdf (Page 311)

Analog Commands 9

Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz 311

A power search is recommended for signals with pulse widths less than one microsecond.

Refer to “:ALC:SEARch" on page 260.

Example

:PULM:INT:PWIDth 100MS

The example sets the pulse width to 100 mS.

*RST +1.00000000E−006

Range 10 nS to –20 nS (pulse period)

:PULM:INTernal[1]:PWIDth:STEP

Supported Option UNU or UNW

[:SOURce]:PULM:INTernal[1]:PWIDth:STEP<num><time_suffix>|MAXimum|MINimu

m|DEFault

[:SOURce]:PULM:INTernal[1]:PWIDth:STEP?

Sets the step increment for the pulse width using the variable <num><time_suffix>.

The step value, set by this command, is used with the UP and DOWN choices available in

the “:PULM:INTernal[1]:PWIDth" on page 310 command.

The step value, set with this command, is not affected by a power-on, preset, or *RST

command.

Example

:PULM:INT:PWID:STEP 100NS

The example sets the pulse width step to 100 nS.

*RST +1.00000000E−006

Range 10 nS to –20 nS (pulse period)

:PULM:INTernal

Supported Option UNU or UNW

[:SOURce]:PULM:SOURce:INTernal SQUare|FRUN|TRIGgered|DOUBlet|GATEd

[:SOURce]:PULM:SOURce:INTernal?

Selects one of the five internally generated modulation inputs. There are two external

sources: Scalar and Ext Pulse which are selected using the :PULM:SOURce command.

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 331 332

No comments

Agilent Technologies N8201A Service Manual Page 311