Agilent Technologies B2902 Service Manual download pdf (Page 134)

4- 12 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

:CALCulate:LIMit:FUNCtion

Example :CALC2:LIM12:FAIL?

:CALCulate:LIMit:FUNCtion

Sets the type of the limit test specified by m.

Syntax :CALCulate[c]:LIMit[m]:FUNCtion type

:CALCulate[c]:LIMit[m]:FUNCtion?

Parameter type COMPliance|LIMit (default). Parameter data type is CPD.

type=COMP sets the compliance status check which checks if the channel is in the

compliance status.

type=LIM sets the limit test which checks if the measurement value is between the

upper limit and the lower limit.

Query response type <newline>

type returns the present setting of the type, COMP or LIM. Response data type is

CRD.

Example :CALC:LIM:FUNC COMP

:CALC2:LIM12:FUNC?

:CALCulate:LIMit:<LOWer|UPPer>

Sets a lower/upper limit used for the limit test specified by m.

Syntax :CALCulate[c]:LIMit[m]:<LOWer|UPPer> limit

:CALCulate[c]:LIMit[m]:<LOWer|UPPer>? [limit]

For <LOWer|UPPer>, specify LOWer for lower limit, or UPPer for upper limit.

Parameter limit value (-9.999999E+20 to +9.999999E+20)|MINimum|

MAXimum|DEFault (default is -1 for the lower limit and +1

for the upper limit). Parameter data type is NRf+. Query does

not support limit=value.

Query response limit <newline>

1 ... 133 134 135 ... 326

No comments

Agilent Technologies B2902 Service Manual Page 134