Agilent Technologies B2902 Service Manual download pdf (Page 224)

4- 102 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

[:SOURce]:DIGital:INTernal[c]:TOUTput[:EDGE]:POSition

Syntax [:SOURce]:DIGital:EXTernal[n]:TOUTput:TYPE type

[:SOURce]:DIGital:EXTernal[n]:TOUTput:TYPE?

Parameter type Trigger type.

EDGE

(default)

|LEVel

. Parameter data type is

CPD.

type=EDGE selects the Edge trigger.

type=LEVel selects the Level trigger.

Query response response <newline>

response returns the present setting of trigger type, EDGE or LEV. Response data

type is CRD.

Example :DIG:EXT:TOUT:TYPE LEV

:SOUR:DIG:EXT14:TOUT:TYPE?

[:SOURce]:DIGital:INTernal[c]:TOUTput[:EDGE]:PO

Sition

Selects the output trigger timing for the specified channel.

Syntax [:SOURce]:DIGital:INTernal[c]:TOUTput[:EDGE]:POSition position

[:SOURce]:DIGital:INTernal[c]:TOUTput[:EDGE]:POSition?

Parameter position Output trigger timing.

BEFore|AFTer|BOTH

(default). Parameter

data type is CPD.

type=BEFore enables trigger output at the beginning of arm, trigger, and device

actions (transient or acquire).

type=AFTer enables trigger output at the end of arm, trigger, and device actions

(transient or acquire).

type=BOTH enables trigger output at both beginning and end of arm, trigger, and

device actions (transient or acquire).

Query response response <newline>

response returns the present setting of output trigger timing, BEF, AFT or BOTH.

Response data type is CRD.

Example :DIG:INT:TOUT:POS BEF

1 ... 223 224 225 ... 326

No comments

Agilent Technologies B2902 Service Manual Page 224