Agilent Technologies B2902 Service Manual download pdf (Page 62)

2- 22 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Command Summary

Setting Source/Measure Unit

Table 2-3 OUTPut Subsystem

Command Summary Reset setting

:OUTP[c]:FILT:AUTO mode

:OUTP[c]:FILT:AUTO?

Enables or disables the automatic filter

function.

mode=1|ON|0|OFF

OFF

:OUTP[c]:FILT[:LPAS]:FREQ freq

:OUTP[c]:FILT[:LPAS]:FREQ? [DEFa

ult|MINimum|MAXimum]

Sets the cutoff frequency of the output

filter. This command setting is ignored if

the automatic filter function is enabled by

the :OUTP:FILT:AUTO command.

freq=MINimum|MAXimum|DEFault|

31.830 Hz to +31.831 kHz

freq = 1/(2    Tconst)

MIN

:OUTP[c]:FILT[:LPAS][:STAT] mode

:OUTP[c]:FILT[:LPAS][:STAT]?

Enables or disables the output filter.

mode=1|ON|0|OFF

ON

:OUTP[c]:FILT[:LPAS]:TCON Tconst

:OUTP[c]:FILT[:LPAS]:TCON? [DEFa

ult|MINimum|MAXimum]

Sets the time constant instead of setting

the cutoff frequency of the output filter.

This command setting is ignored if the

automatic filter function is enabled by the

:OUTP[c]:FILT:AUTO command.

Tconst=MINimum|MAXimum|DEFault|

5 s to 5 ms

Tconst = 1/(2    freq)

MIN

:OUTP[c]:HCAP[:STAT] mode

:OUTP[c]:HCAP[:STAT]?

Enables or disables the high capacitance

mode.

mode=1|ON|0|OFF

OFF

:OUTP[c]:LOW low_state

:OUTP[c]:LOW?

Selects the state of the low terminal.

low_state=FLOat|GROund

GRO

:OUTP[c]:OFF:AUTO mode

:OUTP[c]:OFF:AUTO?

Enables or disables the automatic output

off function.

mode=1|ON|0|OFF

OFF

1 ... 61 62 63 ... 326

Comments to this Manuals

No comments