Agilent Technologies B2902 Service Manual download pdf (Page 203)

Agilent B2900 SCPI Command Reference, Edition 2 4- 81

Subsystem Commands

:SENSe:<CURRent[:DC]|RESistance|VOLTage[:DC]>:RANGe[:UPPer]

Syntax :SENSe[c]:RESistance:RANGe:AUTO:ULIMit range

:SENSe[c]:RESistance:RANGe:AUTO:ULIMit? [range]

:SENSe[c]:<CURRent|VOLTage>[:DC]:RANGe:AUTO:ULIMit?

For <CURRent|VOLTage>, specify CURRent for the current measurement, or

VOLTage for the voltage measurement.

Parameter range value (see Table 2-9)|MINimum|MAXimum| DEFault (default

is 200 M). Parameter data type is NRf+. Query does not

support range=value.

Query response range <newline>

range returns the present setting of the maximum measurement range for the auto

range. If a parameter is specified, range returns the value assigned to DEF, MIN, or

MAX. Response data type is NR3.

Example :SENS:RES:RANG:AUTO:ULIM 1E6

:SENS2:CURR:DC:RANG:AUTO:ULIM?

:SENSe:<CURRent[:DC]|RESistance|VOLTage[:DC]>:

RANGe[:UPPer]

Specifies the expected measurement value, and sets the measurement range which

provides the best resolution to measure the specified value.

Syntax :SENSe[c]:<CURRent[:DC]|RESistance|VOLTage[:DC]>:RANGe:UPPer range

:SENSe[c]:<CURRent[:DC]|RESistance|VOLTage[:DC]>:RANGe:UPPer? [range]

For <CURRent[:DC]|RESistance|VOLTage[:DC]>, specify CURRent[:DC] for

current measurement, RESistance for resistance measurement, or VOLTage[:DC]

for voltage measurement.

data type is NRf+. Query does not support range=value, UP,

and DOWN.

value for current measurement: See Table 2-8.

value for voltage measurement: See Table 2-7.

1 ... 202 203 204 ... 326

No comments

Agilent Technologies B2902 Service Manual Page 203