Agilent Technologies B2902 Service Manual download pdf (Page 198)

4- 76 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

:SENSe:<CURRent[:DC]|VOLTage[:DC]>:PROTection[:LEVel]

Query response mode <newline>

mode is 0 or 1, and indicates that the automatic NPLC function is off or on,

respectively. Response data type is NR1.

Example :SENS:CUR:NPLC:AUTO 0

:SENS2:CURR:DC:NPLC:AUTO?

:SENSe:<CURRent[:DC]|VOLTage[:DC]>:PROTection

[:LEVel]

Sets the compliance value of the specified channel.

Syntax :SENSe[c]:<CURRent[:DC]|VOLTage[:DC]>:PROTection[:LEVel] compliance

:SENSe[c]:<CURRent[:DC]|VOLTage[:DC]>:PROTection[:LEVel]? [compliance]

For <CURRent[:DC]|VOLTage[:DC]>, specify CURRent[:DC] for current

compliance, or VOLTage[:DC] for voltage compliance.

Parameter compliance value (see maximum current or maximum voltage in “Source

Output Ranges” on page 2-24) |MINimum| MAXimum|DEFault

(default is 100 A or 2 V). Parameter data type is NRf+.

Effective values of value are from the minimum measurement

value to the maximum measurement value of the channel.

Query does not support compliance=value.

Query response compliance <newline>

compliance returns the present compliance value. If a parameter is specified,

compliance returns the value assigned to DEF, MIN, or MAX. Response data type is

NR3.

Example :SENS:CURR:PROT 1E-3

:SENS2:CURR:DC:PROT:LEV?

:SENSe:<CURRent[:DC]|VOLTage[:DC]>:PROTection

:TRIPped?

Returns the compliance status of the specified channel.

Syntax :SENSe[c]:<CURRent[:DC]|VOLTage[:DC]>:PROTection:TRIPped?

1 ... 197 198 199 ... 326

No comments

Agilent Technologies B2902 Service Manual Page 198