Agilent Technologies B2902 Service Manual download pdf (Page 148)

4- 26 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

:DISPlay[:WINDow]:TEXT:DATA

For the DUAL display mode, the :DISP:WIND2:DATA? command returns the data

displayed on the lower display area.

For the GRAPh or ROLL display mode, response returns

“-----------,-----------,-----------,-----------”.

Example :DISP:DATA?

:DISP:WIND2:DATA?

:DISPlay[:WINDow]:TEXT:DATA

Sets the text message displayed on the center of the upper or lower display area of

the front panel display.

Syntax :DISPlay[:WINDow[d]]:TEXT:DATA text

:DISPlay[:WINDow[d]]:TEXT:DATA?

Parameter text Text. Up to 32 ASCII characters. Parameter data type is SPD.

Query response text <newline>

text returns the text message. Response data type is SRD.

Example :DISP:TEXT:DATA “Sweep measurement”

:DISPlay[:WINDow]:TEXT:STATe

Shows or hides the text message set by the :DISPlay[:WINDow]:TEXT:DATA

command.

Syntax :DISPlay[:WINDow[d]]:TEXT:STATe mode

:DISPlay[:WINDow[d]]:TEXT:STATe?

Parameter mode 1|ON|0|OFF (default). Parameter data type is boolean.

mode=1 or ON shows the text message.

mode=0 or OFF hides the text message.

Query response mode <newline>

mode is 0 or 1, and indicates that the text message is off or on, respectively.

Response data type is NR1.

1 ... 147 148 149 ... 326

No comments

Agilent Technologies B2902 Service Manual Page 148