Agilent Technologies B2902 Service Manual download pdf (Page 175)

Agilent B2900 SCPI Command Reference, Edition 2 4- 53

Subsystem Commands

:OUTPut:FILTer:AUTO

OUTPut Subsystem

For the numeric suffix [c], see “Numeric Suffix” on page 1-8.

:OUTPut:FILTer:AUTO

Enables or disables the automatic filter function.

Syntax :OUTPut[c]:FILTer:AUTO mode

:OUTPut[c]:FILTer:AUTO?

Parameter mode 1|ON|0|OFF (default). Parameter data type is boolean.

mode=0 or OFF disables the automatic filter function.

mode=1 or ON enables the automatic filter function. If this function is enabled, the

instrument automatically sets the output filter which provides the best filter

characteristics and cutoff frequency. The following command settings are ignored.

• :OUTPut:FILTer[:LPASs]:FREQuency

• :OUTPut:FILTer[:LPASs]:TCONstant

Query response mode <newline>

mode is 0 or 1, and indicates that the automatic filter function is off or on,

respectively. Response data type is NR1.

Example :OUTP:FILT:AUTO 1

:OUTP2:FILT:AUTO?

:OUTPut:FILTer[:LPASs]:FREQuency

Sets the cutoff frequency of the output filter. This command setting is ignored if the

automatic filter function is enabled by the

:OUTPut:FILTer:AUTO command.

Syntax :OUTPut[c]:FILTer[:LPASs]:FREQuency frequency

:OUTPut[c]:FILTer[:LPASs]:FREQuency? [frequency]

1 ... 174 175 176 ... 326

No comments

Agilent Technologies B2902 Service Manual Page 175