Agilent Technologies N8201A Service Manual download pdf (Page 201)

100

101

Marker -> 10

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 201

Mkr->Stop

Changes the stop frequency to the frequency of the active marker. The marker stays at this

frequency, so it moves to the right of the display. This function is not available in Zero Span.

Key Path: Marker ->

Remote Command:

:CALCulate:MARKer[1]|2|3|4[:SET]:STOP

Example:

CALC:MARK1:STOP sets the stop frequency to the value (or delta value) of marker 1.

MkrΔ->Span

Sets the start and stop frequencies to the values of the delta markers. The marker is then

set to normal at the center frequency. Only available in Delta, Span Pair, and Delta Pair

modes. This function is not available if the marker is off, or in Normal mode or when the

span is Zero Span.

Key Path: Marker ->

Remote Command:

:CALCulate:MARKer[1]|2|3|4[:SET]:DELTa:SPAN

Remote Command Notes:

Select the delta marker mode with :CALCulate:MARKer[1]|2|3|4:MODE DELTa.

Example:

CALC:MARK2:DELT:SPAN sets the start and stop frequencies to the values of the delta

markers of marker 2.

MkrΔ->CF

Sets the delta marker to the center frequency. Only available in Delta, Span Pair, and Delta

Pair modes. This function is not available if the marker is off, or in Normal mode or when the

span is Zero Span.

Key Path: Marker ->

Remote Command:

:CALCulate:MARKer[1]|2|3|4[:SET]:DELTa:CENTer

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 621 622

Comments to this Manuals

No comments

Agilent Technologies N8201A Service Manual Page 201

Comments to this Manuals

Related products and manuals for Video converters Agilent Technologies N8201A