Agilent Technologies 4294A Service Manual download pdf (Page 439)

100

101

Chapter 16 439

GPIB Command Reference

SMKRP{1-7}

16. GPIB

Command Reference

( S - Z , :PROG )

SMKRP{1-7}

Syntax SMKRP{1|2|3|4|5|6|7} <numeric>

SMKRP{1|2|3|4|5|6|7}?

Description For the active trace (set with the “TRAC” command on page 457), moves a sub marker

(marker number 1-7) to the specified measurement point. In the coupled marker mode (set

with the

“MKRCOUP” command on page 352), regardless of the active trace setting,

moves the sub marker on both the A and B traces. If this command is executed as Query, it

reads out the measurement point number at the sub marker position. If the sub marker is

off, executing this command causes an error and the command is ignored.

Parameters

If the specified parameter is out of the allowable setting range, the minimum value (if the

lower limit of the range is not reached) or the maximum value (if the upper limit of the

range is exceeded) is set.

Query response {numeric}<newline><^END>

Corresponding

key

No front panel key is available to execute this function.

Description Number of the measurement point where you want to move the sub

marker (the number assigned in order from the left edge assuming

that the number of the leftmost measurement point is 1)

Range 1 to the number of points

Initial value 1

Resolution 1

1 2 ... 434 435 436 437 438 439 440 441 442 443 444 ... 517 518

Comments to this Manuals

No comments

Agilent Technologies 4294A Service Manual Page 439

Comments to this Manuals

Related products and manuals for Multimeters Agilent Technologies 4294A